The effect of wilting on palatability of plants to Schistocerca gregaria,the desert locust

Summary Previous work has shown that host choice by acridids (grasshoppers and locusts) is sensitive to alterations in host quality. In particular, reduced plant water content has been found to increase palatability of certain plant species. To determine if this phenomenon is general, and to gain preliminary information on causes, turgid and wilted plant material of forty-one species was tested using nymphs of the desert locust, Schistocerca gregaria. Twelve plant species (29%) had increased and five (12%) had decreased palatability (as measured by meal size) when wilted. Among fifteen families tested, the increases occurred in six, the decreases in three. The greatest change occurred in Taraxacum officinale; further tests on this plant revealed the increase to be continuous, rising with decreasing water content. The behavioral observations combined with the pattern of the results across plant species suggest that changes are due to alterations in specific deterrents or stimulants, rather than to decreased water content or increased concentrations of amino acids and/or sugars. The implications of these results for understanding drought-associated population outbreaks are discussed.     

Effects of chemical and botanical insecticides used for locust control on Metarhizium anisopliae var. acridum conidia after short- to medium-term storage at 30°C

The short- to medium-term viability and growth of Metarhizium anisopliae var. acridum conidia were investigated when combined with six insecticides, at three different concentrations. All of the insecticides used in this study were suitable for immediate spraying with M. anisopliae var. acridum conidia except for fenitrothion. Fipronil, teflubenzuron, and fenitrothion formulations significantly reduced conidial viability over time. The 10% teflubenzuron treatment caused loss of viability relatively quickly with 9.9% germination after 28 days. Mycelial growth was affected by all the treatments except fenitrothion.     

Species confirmation of fungal isolates by molecular analysis

Traditional taxonomy of hyphomycetes has been based on conidial morphology and development. In order to confirm species level for the detection and identification of the entomopathogenic fungus, we analysed the species-specific fingerprints to investigate molecular characteristics within isolates of six species and to resolve morphologically atypical isolates. The extent of fingerprint profile observed by RAPD was sufficient to confirm the species level of all the isolates. The genetic similarity among morphologically identified isolates of each species was considerably higher, allowing us to conclude that all the isolates are of same species. These results establish a molecular framework for further taxonomic, phylogenetic and comparative biological investigations.     

Culture conditions affect virulence and production of insect toxic proteins in the entomopathogenic fungus Metarhizium anisopliae

Conidial spores are often used as the infectious agent during insect biocontrol applications of entomopathogenic fungi. Here we show differential virulence of conidia derived from Metarhizium anisopliae strain EAMa 01/58-Su depending upon the solid substrata used for cultivation, where LC₅₀ values differed by up to ~10-fold (5.3×10⁶?4.5×10⁵ conidia/ml) and LT₅₀ values by ~40% (9.8?7.1 d). This fungal strain is also known to secrete proteins that are toxic towards adult Mediterranean fruit flies, Ceratitis capitata, and the Greater wax moth, Galleria mellonella, larvae. In vitro production and intrahemoceol injection using G. mellonella as the host was used to test fractions during purification of the protein toxins, demonstrating that they elicited defence-related responses including melanisation and tissue necrosis. Production of these proteins/peptides along with a number of potential cuticle degrading enzymes was confirmed both in vitro and during the infection process (in vivo). Two-dimensional gel electrophoresis, followed by gel elution and bioassay, was used to identify at least three proteins or peptides (molecular mass=11, 15 and 15 kDa) as mediating the observed insect toxicity. These data demonstrate that in vitro screening for insect toxins can mimic in vivo (i.e. during the infection process) secretion and applies the use of proteomics to invertebrate pathology.     

Field observations of the effect of Metarhizium anisopliae var. acridum on the saxaul locust,Dericorys albidula Serville (Orthoptera: Dericorythidae)

Dericorys albidula Serville (Orthoptera: Dericorythidae) is a major pest of Haloxylon ammodendron and other saxaul plant species in the Qom province, Iran. Using fungal insecticides can be an alternative method for chemical insecticides. Effect of insecticide fungi, Metarhizium anisopliae var. acridum, on the various nymphs of D. albidula was studied in the field through 2005 and 2006. Fixed concentrations of fungi (10⁶, 10⁷, 10⁸, 10⁹, 10¹⁰ and 10¹³ spore mL^?1) were prepared as gasoline formulation and were sprayed on the locusts on H. ammodendron trees, and mortality percentage was recorded 15 days after treatment. The results showed that various concentrations significantly affected on the second, third, fourth and fifth nymphal instars of D. albidula compared to control in 2006, although this effect was lower in 2005 on nymphs. Mortality of the highest concentration (10¹³ spore mL^?1) was higher (17.6–24%) than other concentrations in all tests, but these values were not notable. The results of this study showed that using M. anisopliae var. acridum diluted in gasoline can be effective on nymphal instars of locust, D. albidula, in two continuous years.     

The feasibility of an approximate irregular field dose distribution simulation program applied to a respiratory motion compensation system

PurposeThis study optimized our previously proposed simulation program for the approximate irregular field dose distribution (SPAD) and applied it to a respiratory motion compensation system (RMCS) and respiratory motion simulation system (RMSS). The main purpose was to rapidly analyze the two-dimensional dose distribution and evaluate the compensation effect of the RMCS during radiotherapy.MethodsThis study modified the SPAD to improve the rapid analysis of the dose distribution. In the experimental setup, four different respiratory signal patterns were input to the RMSS for actuation, and an ultrasound image tracking algorithm was used to capture the real-time respiratory displacement, which was input to the RMCS for actuation. A linear accelerator simultaneously irradiated the EBT3 film. The gamma passing rate was used to verify the dose similarity between the EBT3 film and the SPAD, and conformity index (CI) and compensation rate (CR) were used to quantify the compensation effect.ResultsThe Gamma passing rates were 70.48–81.39% (2%/2mm) and 88.23–96.23% (5%/3mm) for various collimator opening patterns. However, the passing rates of the SPAD and EBT3 film ranged from 61.85% to 99.85% at each treatment time point. Under the four different respiratory signal patterns, CR ranged between 21% and 75%. After compensation, the CI for 85%, 90%, and 95% isodose constraints were 0.78, 0.57, and 0.12, respectively.ConclusionsThis study has demonstrated that the dose change during each stage of the treatment process can be analyzed rapidly using the improved SPAD. After compensation, applying the RMCS can reduce the treatment errors caused by respiratory movements.     

The inhibition of lipid synthesis in vitro in the locust, Schistocerca gregaria, by factors from the corpora cardiaca

ABSTRACT. The rate of lipid synthesis from [¹⁴C]acetate in fat body from Schistocerca americana gregaria has been studied in vitro. Maximum incorporation is found on days 6–10 in adults and day 4 of the fifth stadium. The label appeared in the fatty acid components of triacyl-glycerol, diacylglycerol and phospholipid.
Lipid synthesis in vitro was inhibited by extracts of corpora cardiaca, and such inhibition was most marked (up to 85%) in fat bodies from insects at stages where fatty acid synthesis was greatest. HPLC separation of corpora cardiaca extracts gave several active fractions of which the most active was adipokinetic hormone 1 (AKH-1).     

Peripheral-zone treatments for plum curculio management: validation in commercial apple orchards

A field trial was conducted using an oil formulation of the entomopathogenic fungus, Metarhizium flavoviride Gams & Rozyspal (Deuteromycotina: Hyphomycetes), to control the variegated grasshopper, Zonocerus variegatus L. (Orthoptera: Pyrgomorphidae). The influence of dispersal and secondary pick-up from the spray residue on mortality was assessed by sampling insects from the treated plots at intervals and monitoring disease levels during subsequent incubation in the laboratory. The cumulative mortality curves showed the pathogen to be highly effective, even in samples taken 8 days after spraying. A model was developed to link the influence of mortality, incubation, secondary pick-up of spores and insect dispersal, on the shape of these cumulative mortality curves. The model proved useful for data received from an experiment using small plot sizes, where insect dispersal is a big problem. The spray residue had an important influence on overall insect mortality. The model also indicated a difference in speed of kill between field and laboratory samples, suggesting an incubation delay in the field.     

The use of cell cultures in human genetics

Advice on rearing locusts is followed by suggestions for simple investigations, needing only inexpensive equipment, which will help students to understand the circumstances in which locusts become a major threat to food supplies in many parts of the Tropics.     

Effects of media composition on submerged culture spores of the entomopathogenic fungus, Metarhizium anisopliae var. acridum, Part 1: Comparison of cell wall characteristics and drying stability among three spore types

Metarhizium anisopliae var. acridum (IMI 330189) can produce at least three spore types in vitro; blastospores, submerged conidia, and aerial conidia, as defined by culturing conditions, sporogenesis, and spore morphology. This study compares morphological characteristics (dimensions and cell wall structure), chemical properties of cell wall surfaces (charge, hydrophobicity, and lectin binding), and performance (germination rate and drying stability) among these three spore types. Submerged conidia and aerial conidia both possessed thick, double-layered cell walls, with hydrophobic regions on their surfaces. However, in contrast to aerial conidia, submerged conidia have: (1) a greater affinity for the lectin concanavalin-A; (2) more anionic net surface charge; and (3) a less distinct outer rodlet layer. Blastospores were longer and more variable in length than both submerged conidia and aerial conidia, and had thinner single-layered cell walls that lacked an outer rodlet layer. Also, blastospores had a greater affinity than either conidia type for the lectin, wheat germ agglutinin. Blastaspores lacked hydrophobic regions on their surface, and had a lower anionic net surface charge than submerged conidia. In culture, blastospores germinated the fastest followed by submerged conidia, and then aerial conidia. Survival of submerged conidia and aerial conidia were similar after drying on silica gel, and was greater than that for blastospores. We provide corroborating information for differentiating spore types previously based on method of production, sporogenesis, and appearance of spores. These physical characteristics may have practical application for predicting spore-performance characteristics relevant to production and efficacy of mycoinsecticides.